Drill, Impact,1/2" Square Drive,U/W,Hydraulic

STANLEY ID07 UNDERWATER IMPACT DRILL (ID07920)

The Stanley ID07 Impact/Drill is two hydraulic underwater tools in one - an impact wrench and a wood drill. The 1/2" square drive impact wrench delivers torque up to 500 ft lbs and can tighten and loosen nuts and bolts and drive lag screws. Use the ID07 with the 05079 Adapter and wood boring bits for drilling in timbers up to 11/16" diameter holes with no reactive torque to the diver. Trigger guard and hi-visibility yellow paint is standard.

ID07920 Specifications
Capacity: 1/2" (12.7mm) Square Drive
Performance: Torque 500 ft-lbs(675 Nm)
Flow Range: 4-12 gpm (15-45 lpm)
Working Pressure: 750-2000 psi (50-140 bar)
Full Relief Setting: 2250 psi (155 bar)
Weight: 7.2 lb (3.3 kg)
Length: 10" (25.4cm)
Width: 4.25" (10.8m)
Hydraulic Ports: -8 SAE o-ring
Connect Size and Type: 3/8" male pipe adapter

ID07920 Features
Integral Stanley Hyrevz gear motor produces high torque
Stainless Steel spools and fasteners
Forward-Reverse with variable speed
500 ft-lbs (675 Nm) of impact torque
Oversized trigger with guard for operator comfort
Wiper seals on reversing and trigger spool
Built in reverse check valve ensures long seal life
Plastisol handle for comfortable ergonomic grip
Forward position of handle provides better balance
Open Center/Closed Center-Dual Spool Feature
Cast-in lifting eye

DL07652 Accessories
03971: Flush-Face Coupling Set, 3/8" NPT
03974: Flush-Face Coupling Set, 1/2" NPT
31848: Dual Hose, 50' x 1/2", with couplers
31972: Dual Hose, 25' x 1/2", with couplers
58633: Twinned Hose, 25' x 1/2", with couplers
58634: Twinned Hose, 50' x 1/2", with couplers
05079: Adaptor ½1/2" female sq. dr. x 7/16" QC Hex