Toggle Nav
Hose, 1/2"ID X 15/16"OD 1000PSI WP,Gates
was
$6.93
Special Price
$5.69
Availability:
In stock
SKU
33HB.500-0-299
GATES 1/2" I.D. DIVE MASTER DIVER'S BREATHING GAS HOSE (33HB.500-0-299)
Gates rubber hose is made for handling mixtures of oxygen, helium and nitrogen gases used in diving applications as a breathing gas delivery hose. Made of black synthetic rubber, it is reinforced with two fiber braids and has an abrasion and oil resistant outer jacket. This kink resistant hose is designed for extra long wear under normal operating use.
Gates rubber hose is made for handling mixtures of oxygen, helium and nitrogen gases used in diving applications as a breathing gas delivery hose. Made of black synthetic rubber, it is reinforced with two fiber braids and has an abrasion and oil resistant outer jacket. This kink resistant hose is designed for extra long wear under normal operating use.
| Specifications |
|---|
| Description Gates 1/2” I.D. (33HB.500-0-299) Dive Master diver's breathing gas hose |
| Standard Lengths Up to 299' (91 m) |
| Inner Diameter 1/2" (12.7 mm) |
| Outer Diameter: 0.94" (23.9 mm) |
| Maximum Working Pressure: 1000 psi (68.9 bar) |
| Minimum Bend Radius: 5.0" (127 mm) |
| Temperature Range: -20°F to 120°F (-29°C to 49°C) |
| Tube: Type C (Nitrile), Black |
| Reinforcement: Braided, high tensile synthetic textile cord |
| Cover: Type A (chloroprene), black, perforated |
| Design Factor: 4:1 |
| Weight: 0.29 lb/foot (432 g/m) |
| Standards: Meets BS EN250:2014 |
| Cleanliness: At the factory, the length of hose is rinsed with water for 30 seconds to 1 minute, followed by a sponge plug blown through the hose to remove water. As second, alcohol soaked sponge is then blown through the hose. followed by air for 30 seconds. |
| Compatible Fittings: Gates 500B-10 #10 JIC reusable brass fitting |
| Vendor | Motion Industries, Inc. |
|---|
Write Your Own Review
Featured
