Toggle Nav
Valve, Relief, 1/4" NPT Male, 180 PSI, Brass
Availability:
Out of stock
SKU
112CSS-2-180
KINGSTON 180 PSI RELIEF VALVE (112CSS-2-180)
All Kingston Safety Valves are manufactured under a quality control sys-tem approved by the National Board of Boiler and Pressure Vessel Inspectors.
Coded valves are certified by the ASME and set and sealed at the factory.
Set pressure can deviate from the marked by ±2 PSI below 70 PSI set pressures and ±3% at 70 PSI and above.
All Kingston Safety Valves are manufactured under a quality control sys-tem approved by the National Board of Boiler and Pressure Vessel Inspectors.
Coded valves are certified by the ASME and set and sealed at the factory.
Set pressure can deviate from the marked by ±2 PSI below 70 PSI set pressures and ±3% at 70 PSI and above.
| Specifications: |
|---|
| Set Pressure: 175 PSIG (12 bar) |
| Set Pressure Tolerance: ±5.25 PSIG (0.36 bar) |
| Seat Leakage: Bubble tight within ±17.5 PSIG (1.2 bar) |
| Stamped CFM: 108 CFM (51 LPS) |
| Connection Size: 1/4" NPT male |
| Construction Material: Brass |
| Ball Material: Stainless steel |
| Spring Material: Stainless steel |
| Seal Material: Vinyl |
| Maximum Operating Temperature: 400°F (204°C) |
| Overall Length: 3-1/8" (7.9cm) |
Write Your Own Review
